• Novo
XMeifeits STEP DRIL

XMeifeits STEP DRIL

€ 2.67

Montante
Existente

Cortador profissional de broca industrial com alta dureza e resistência ao desgaste, alta resistência ao calor e resistência A broca de etapa de cobalto M35 (HSS CO) é uma broca de etapa de alta dureza que é aplicada principalmente para perfurar aço de alta dureza, como o plano de aço inoxidável e o aço endurecido. A broca de etapa M35 pode ser utilizada para perfurar orifícios no plano de aço inoxidável. A velocidade de perfuração não pode ser muito rápida na placa de aço inoxidável. Cem rpm é suficiente. Adicione a água ou o fluido de corte para esfriar durante o processamento, a fim de prolongar a vida útil dos bits de perfuração. Cortador profissional de broca industrial com alta dureza e resistência ao desgaste, alta resistência ao calor e resistência. A broca de etapa de cobalto M35 (HSS CO) é uma broca de etapa de alta dureza que é aplicada principalmente para perfurar aço de alta dureza, como o plano de aço inoxidável e o aço endurecido. A broca de etapa M35 pode ser utilizada para perfurar orifícios no plano de aço inoxidável.

Mais dados

4-12 mm (4,5,6,7,8,9,10,11,12mm):
4-20 mm (4,6,8,10,12,14,16,18,20mm):
4-32 mm (4,6,8,10,12,14,16,18,20,22,24,26,28,30,32mm):
Main Functions of Product:
M35 cobalt step drill (HSS Co)is a high hardness step drill bit that is mainly applied for drilling high hardness steel,such as,the stainless steel plane and hardened steel.M35 step drill bit can be utilized to drill holes in the stainless steel plane.:
the following points that you need to pay attention to:
You can use the hand drill and bench drill to drill holes in the stainless steel plane.Use the hand drill for the board whose thickness is within 1 mm/0.04 in,while use the bench drill for the board whose thickness is about 2-3 mm/0.08-0.12 in;:
the drilling speed can't be too fast on the stainless steel plate.Hundred rpm is enough.:
Please add the water or cutting fluid to cool down during the processing so as to extend the service life of the drill bits.:
M35 Hex handle 3PCS:
Specification:
4-12 mm (4,5,6,7,8,9,10,11,12mm):
4-20 mm (4,6,8,10,12,14,16,18,20mm):
4-32 mm (4,6,8,10,12,14,16,18,20,22,24,26,28,30,32mm):
Main Functions of Product:
M35 cobalt step drill (HSS Co)is a high hardness step drill bit that is mainly applied for drilling high hardness steel,such as,the stainless steel plane and hardened steel.M35 step drill bit can be utilized to drill holes in the stainless steel plane.:
the following points that you need to pay attention to:
You can use the hand drill and bench drill to drill holes in the stainless steel plane.Use the hand drill for the board whose thickness is within 1 mm/0.04 in,while use the bench drill for the board whose thickness is about 2-3 mm/0.08-0.12 in;:
the drilling speed can't be too fast on the stainless steel plat :

Mais produtos na categoria