• Novo
Cabeça da impressora, alto desempenho 933 932 peças de reposição de cabeçote de impressão para HP OfficeJet 6600/6100/6700/7110/7510/7512/7610/7612, suprimentos de impressora 3D

Cabeça da impressora, alto desempenho 933 932 peças de reposição de cabeçote de impressão para HP OfficeJet 6600/6100/6700/7110/7510/7512/7610/7612,

€ 2.00

Montante
Existente

Cena aplicável : esta impressão da impressora é adequada para o HP Office Jet 6600/6100/6700/7110/7510/7512/7610/7612 Materiais de alta qualidade : o alojamento da cabeça de impressão é feito de ABS de alta qualidade, que é mais resistente ao desgaste, forte e durável. Excelente desempenho : alto desempenho atualizado 933 932 CHIP CABEÇA DE PRIMAGEM, Identificação mais rápida do cartucho de tinta, jato de tinta suavizante, impressão clara e cores brilhantes. Correndo sem problemas : testado muitas vezes para garantir o desempenho do cabeçote de impressão e manter sua impressora funcionando sem problemas. Instalação fácil : o kit contém 1 cabeça de impressão, que pode ser instalada e usada sem acessórios ou desmontagem, sem danificar a máquina original. Como usar : Retire o produto e use -o especificação : Item Tipo : Impressora Material da cabeça : ABS Adequado : Para o HP Office Jet 6600/6100/6700/7110/7510/7512/7610/7612 Use sugestões : 1.

Mais dados

Item Type:
Printer Head
Material:
ABS
Suitable:
for HP OfficeJet 6600/6100/6700/7110/7510/7512/7610/7612
Package List:
1 x Printer Head:
Note:
Use suggestions:
1. The surfaces of the print head must be protected and must not be touched, because its surfaces layer is made of aluminum plate, and the inner layer is coated with crystal oscillators and small ink tubes. Once in contact, it deforms or breaks, causing the printhead to be scrapped and unable to work.:
2. When installing the print head, be sure to cut off the power supply and install it in place. After the installation is completed, gently push it left and right with your hands to check whether it is flat. Turn on the power after confirming that it is flat, because if the print head is not in place, the print head can easily break when the carriage moves.:
3. Do not carry ink cartridges when starting up, and ensure that the ink is in good contact with the socket, and do not touch the feet, otherwise the print head will be short‑circuited and burned:
4. Check whether there is insufficient water in the ink cartridge, and check whether the small cleaning blade and the ink suction pump are dirty:
5. There is air in the newly installed print head, which may not work at the beginning. The air in the print head must be exhausted to work properly.:
The printer can be cleaned intermittently by removing the air in the print head (only two times at a time, then stop for 30 minutes, and then clean 2 times):

Mais produtos na categoria