• Novo
Placa de carregamento de bateria Daoki 10pcs Micro USB TP4056 Placa de carregamento de carregamento de bateria de lítio com proteção 5V 1A funções duplas

Placa de carregamento de bateria Daoki 10pcs Micro USB TP4056 Placa de carregamento de carregamento de bateria de lítio com proteção

€ 1.90

Montante
Existente

Este módulo usa chip de carregamento muito sofisticado TP4056, o circuito periférico é simples, protege a propriedade, cobra alta precisão O módulo é máquinas de processamento totalmente automatizado, a fabricação de peças SMD, será testada antes de cada módulo que envia alta confiabilidade. A auto-regulação da corrente do módulo, desde que a alteração na placa de circuito resistores fixos possa alterar a saída. Tensão de entrada : 5 V; Corrente máxima de saída : 1 A. Interface de entrada : micro USB. Descrição : Placa de carregamento da bateria de lítio 100% de nova e alta qualidade Especificação : Método de carregamento : Carga linear 1% Corrente de carregamento : 1 A Precisão de carregamento ajustável : 1,5% de tensão de entrada : 4.5 V Tensão de carga completa : 4,2 V Indicador de carregamento : vermelho Charging / Green Full Full Input Interface : Micro USB Conexão do fio : não pode ser revertido Peso : 10g Temperatura de operação : -10 ℃ a + 85 ℃ Tamanho : 25 x 19 x 10mm / 1,0 x 0,7 x 0,4 polegadas Regulamento de corrente : RProg (k) - IBAT (MA) 30 K - 50 MA 20 K - 70 MA 10 K - 130m A 5 K - 250m A 4 K - 300m A 3 K - 400m A 2 K - 580m A 1,66k - 690m A 1,5k - 780m A 1,33k - 900m A 1.

Mais dados

Charging method:
linear charge 1%
Charging current:
1A adjustable
Charging accuracy:
1.5%
Input voltage:
4.5V-5.5V
Full charge voltage:
4.2V
Charging indicator:
Red charging / Green full charge
Input Interface:
Micro USB
Wire connection:
cannot be reversed
Weight:
10g
Operating temperature:
-10 ℃ to + 85 ℃
Size:
25 x 19 x 10mm/1.0 x 0.7 x 0.4inch
Current Regulation:
RPROG (k) - IBAT (mA):
30k - 50mA:
20k - 70mA:
10k - 130mA:
5k - 250mA:
4k - 300mA:
3k - 400mA:
2k - 580mA:
1.66k - 690mA:
1.5k - 780mA:
1.33k - 900mA:
1.2k - 1000mA:
Features:
1.This module uses very sophisticated charging chip TP4056, the peripheral circuit is simple, protect property, charge high accuracy.:
2.The module is fully automated processing machinery, SMD parts manufacturing, will be tested before each module shipping high reliability.:
3.The module current self-regulation, as long as the change in the circuit board fixed resistors can change the output:
Caused 100mA-1000mA, very convenient:
Instruction:
When connecting to battery for the first time, there may be no voltage output between OUT+ and OUT-, then the protection circuit need to activate by connecting to 5V. The protection circuit also need to be activated if battery is disconnected from B+, B- then connect again.:
The output current of phone charger should be no less than 1A, otherwise it may not charge normally.:
Connect battery to B+, B-, then phone charger to Micro USB socket; the red light on means it is charging, green light mains fully charged.:
Package included:
10 x TP4056 1A Lithium Battery Charging Board Micro USB Charger Module:

Mais produtos na categoria