• Novo
DC3V-4.8V de alta tensão Gerador de pulso do inversor de arco de arco Módulo de ignição para o ensino médio instrumento de experimento científico

DC3V-4.8V de alta tensão Gerador de pulso do inversor de arco de arco Módulo de ignição para o ensino médio instrumento de experimento

€ 2.30

Montante
Existente

Pode ser usado como fonte de alta tensão para experimentos científicos do ensino médio, instrumento eletrônico, gerador de íons negativos e pouca ciência Após a entrada da tensão CC 3.8 V, uma alta tensão CC de cerca de 10.000 V (cerca de 1-2 cm de arco) pode ser obtida no final da saída. O circuito periférico é simples (basta conectar o interruptor, instalar a bateria), a intensidade de descarga é violenta. De acordo com o princípio da bobina de Tesla, o módulo produz corrente de pulso de alta tensão, pequeno volume e alta eficiência. Pode gerar arco de alta temperatura e alta frequência, pode facilmente acender combustível. Especificação : Tensão de entrada : 3,0 -4.8 V (1* 3,7 V Bateria de lítio) Corrente : 1-3 A Voltagem de saída : cerca de 400k V (preste atenção à segurança ao usar a corrente de saída : 0,5 A Distância de descarga entre os postes de alta tensão : 0,5- 1,5 cm (além dos limites) Trabalho continuamente tempo : dentro de 10 segundos atenção! A tensão de entrada afetará a tensão de saída e a distância do arco.

Mais dados

Input voltage:
3.0 -4.8V (1* 3.7v lithium battery )
Input current:
1-3A
Output voltage:
about 400KV (please pay attention to safety when using
Output current:
0.5A
Discharge distance between high voltage poles:
0.5-1.5cm (beyond limits)
Work continuously time:
within 10 seconds
Attention! The input voltage will affect the output voltage and arc distance.:
Shape:
T shape, L shape, square shape, round shape(Optional)
Weight:
Approx.32g~37g/1.1oz~1.3oz
Wiring method:
Input end:
red+, yellow-
Output end:
2 pcs same colors wire
Package list:
1 x Pulse Generator:
Note:
 
1.Avoid high-voltage no-load power supply. (it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. The distance of the high-voltage cable to pull the arc is directly proportional to the voltage and capacity of the battery used. When measuring arc distance, the test shall be conducted from short to long.:
2.Power is strictly forbidden when exceeding the maximum arc distance. As the high voltage energy cannot be released, modules are easily damaged. :
3.The power is large, and it is not suitable for internal heat dissipation, so it cannot work for a long time:
4.About the input power:
3.7-v lithium battery can be used in series, such as 18650 battery or Nickel-cadmium/Ni-mh battery , or 4V Acid batteries
5.Please strictly follow the use method and precautions to operate the module, otherwise it is easy to damage the module! :

Mais produtos na categoria